P66 Three Round Liquid Filter Cartridge Housings

Flow Rates Up to 60 GPM

Purolator's Model 66 Liquid Cartridge housing gives the versatility of choosing cartridges for the needed flow rates, chemical compatibility and particle retention. They are a good choice to use in applications where a low micron retention is required. Model P66 accommodates three elements in either 20, 30, or 40 inch lengths.

FEATURES

Carbon or stainless steel construction
Plated quick swing closure with eye nuts
Buna lid seal
316 SS cup & spring assemblies
150 PSI pressure rating
Differential, drain, and vent ports
316 SS center guide post
Epoxy paint - inside and out - on carbon steel
Adjustable support legs

OPTIONS

Duplexing for continual flow during maintenance
Higher pressure rating
ASME code U or UM
Adjustable support legs
Specify element type

DOE (Double Open Ended) cartridges
222 style O-ring with closed top cap
226 style with closed top cap

NOTE: Element is not included in the filter,
but the type of element must be specified at
time of housing order.

Purolator's two-page brochure (123kb) that contains complete technical information about the P66 liquid cartridge housings.

Top