utility grade filter modules are designed to meet the critical
needs of the power distribution and generation industries in the
reconditioning of dielectric oil used in transformers and circuit
breakers. DEPTH-CLEAR media is formulated from specially selected
cellulose fibers and inorganic filter aids. The cellulose fibers
are highly refined in the manufacturing process to provide increased
surface area, resulting in a filter with increased filtration
efficiency and greater contaminant holding capacity. Two different
series and three different media grades are available.
The DEPTH-CLEAR U Series is designed for the removal of carbon
particles and low levels of moisture that result from the break
down of dielectric oil. Removal of these contaminants increases
the dielectric strength and the service life of the oil.
DEPTH-CLEAR U Series is available in three different grades,
NA300, NA600 and NA1000. The NA300 is designed to remove particles
above 3.0 micron and offers the highest filtration efficiency.
The NA300 is commonly used to remove the finely divided carbon
particles found in circuit breakers. The more open NA600 and NA1000
are used on heat-degraded oils found in transformers. The NA1000
is the most open of the utility series and provides higher flow
rates and lower pressure drops.
The SA Series is designed for the removal of both water and carbon
particles. SA Series modules incorporate a layer of water removal
media located between an upstream and downstream layer of U Series
media. The module is designed to withstand a strong pressure increase
when the media is saturated with water. SA Series DEPTH-CLEAR
is available with the NA300, NA600 or NA1000 grade of U Series
DEPTH-CLEAR media. All SA Series modules are packaged with a desiccant
to prevent the absorption of moisture from the air prior to use.
- U Series modules provide reliable particle retention
and long on-stream
- The proprietary formulation process used to produce
the SA Series results
in depth media with exceptionally high moisture retention
- Filter modules are easy to handle and install allowing
for quick and easy change-outs.
- Very high surface area per module results in small space
for filter housings.
- Filter modules are environmentally safe.
- All SA Series modules are packaged with a desiccant
absorption of moisture prior to use.
- Transformer Oils
- Dielectric Oils
- Hydraulic Fluids
- Lubrication Oils
- Turbine Oils
- Machine Oil
- Tool Oil
- Quenching Oils
- Silicone Oils
Learn more about DEPTH-CLEAR SA & U Series Filter
Modules by downloading our specification sheet.
File size: 71kb